3800型8通道刺激器

可编程 8 通道刺激发生器 Model 3800

 Each of the 8 Completely Independent Channels Can Deliver

8 个完全独立的通道中的每一个都可以提供

Pulse durations as short as 1 ?s over a 15 minute timing interval

脉冲持续时间短至 1 μs，时间间隔为 15 分钟

Up to 1 ?s with a 250-hour timing interval

最高 1 μs，定时间隔为 250 小时

In addition to monophasic and biphasic pulse trains, the Model 3800 also delivers traditional protocols such as Paired Pulses and Stepped Pulses. Each channel also has a SUM output, whereby the signals of other channels can be summed together for complicated waveform protocols.

除了单相和双相脉冲序列外，3800 型还提供传统协议，如成对脉冲和步进脉冲。每个通道还有一个 SUM 输出，因此可以将其他通道的信号相加，以用于复杂的波形协议。

 Full Triggering Options Include

完整的触发选项包括

8 channel specific TTL BNC connectors

8 通道专用 TTL BNC 连接器

3 generic TTL BNC connectors that any combination of channels can be linked to

3 个通用 TTL BNC 连接器，可连接任何通道组合

interchannel triggering 通道间触发

There are 3 gate TTL bnc connectors that can be linked to any channel as well. Pulse or Train TTL sync pulses are provided.

有 3 个门 TTL BNC 连接器，也可以连接到任何通道。提供脉冲或训练 TTL 同步脉冲。

By using one channel to trigger another channel, you can combine the timing ranges, resulting in microsecond pulses occurring every 250 hours (if you needed such a schedule!).

通过使用一个通道触发另一个通道，您可以组合时序范围，从而每 250 小时发生一次微秒脉冲（如果您需要这样的计划！

Stimulus program sets can be stored on-board the instrument as well as online. MATLAB? and LabVIEW SDK and drivers are also available.

刺激程序集可以存储在仪器上，也可以在线存储。还提供 MATLAB? 和 LabVIEW SDK 和驱动程序。

This device is a constant voltage device, capable of producing 10 V biphasic pulses. An optional Model 3820 stimulus isolation unit can scale and convert the output into constant current.

该器件是一种恒压器件，能够产生 10 V 双相脉冲。可选的 3820 型激励隔离单元可以缩放并将输出转换为恒流。